ACPE34

联系人：

Sponsorship：   赞助方案.pdf

Chinese Society for Optical Engineering (CSOE)

ZHUANG Songlin, Academician, University of Shanghai for Scienceand Technology

GUO Dongming, Academician, Dalian University of Technology

JIANG Zhuangde, Academician, Xi’an Jiaotong University
Wing Bun LEE, Professor, The Hong Kong Polytechnic University
Chairs：

TAN Jiubin, Academician, Harbin Institute of Technology

LUO Xiangang, Academician, Institute of Optics And Electronics, Chinese Academy of Sciences
HUANG Ming, Institute of Machinery Manufacturing Technology
International Chair：
Prof. Koji Sugioka，RIKEN，Japan

※Chairs：

KONG Lingbao, Fudan University

ZHANG Dawei, University of Shanghai for Science and Technology

培训咨询：

This topic intends to reflect the latest developments in large optical mirror and telescope, including but not limited to: scientific object observation and optical engineering technology, optimization design of large aperture lightweight optical mirror, advanced optics and structural materials, high precision and stability mirror and structure support technology, measurement and control technology of segmented mirror synthetic aperture optics, integrated design of large photoelectric instrument, active optics and adaptive optics, giant tracking junction and its high precision stability control technology, consistency between ground and its space mission for space telescope, precision assembly technology of large photoelectric instruments, test and measurement technology of complicated optical elements and systems.

XUE Donglin, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

FAN Bin, Institute of Optics and Electronics, CAS
Chen，Wei-Jun，Zeiss Group

WANG Wei, Fudan University

WANG Wei, National Astronomical Observatories, CAS

YUAN Qun, Nanjing University of Science and Technology

LIU Haitao, Institute of Optics and Electronics, CAS

ZHANG Junping, Nanjing Institute of Astronomical Optics & Technology, National Astronomical Observatories, CAS 

WANG Hu, Xi'an Institute of Optics and Precision Mechanics, CAS

WANG Yonggang, Beijing institute of space Mechanics & Electricity

YANG Jixing, Tianjin Jinhang Institute of Technical Physics
YANG Xiaofei, Soochow University
Topic Secretary：
FAN Yanchao, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

This topic intends to reflect the latest developments in ultra-precision optical manufacturing equipment, manufacturing technology and process methods, including but not limited to: ultra-precision turning, milling, grinding, polishing and other processes, laser processing, special processing, new micro-nano processing, molding And injection molding, micro-nano imprinting, adding and subtracting material composite technology, multi-energy field auxiliary processing, tool design and manufacturing, tool wear, machining error diagnosis and optimization, machining path planning and optimization, process chain process modeling and simulation, materials Removal mechanism, finite element and molecular dynamics analysis, vibration control, surface full-frequency error analysis and control, machining accuracy maintenance and reliability, machining and testing integration, machine tool core functional devices (high-performance motor, spindle, grating ruler, motion control Controllers, guide rails, turntables, etc.), ultra-precision machining systems and modules, key precision machining algorithms and software, etc.

KONG Lingbao, Fudan University

ZONG Wenjun, Harbin Institute of Technology

WEI Chaoyang, Shanghai Institute of Optics and Fine Mechanics, CAS

MA Zhen, Xi'an Institute of Optics and Precision Mechanics, CAS

PENG Xiaoqiang, National University of Defense Technology

WANG Zhenzhong, Xiamen University

YANG Hong, Institute of Machinery Manufacturing Technology

YOU Fangyi, Huaqiao University

ZHU Wule, Zhejiang University

ZHU Zhiwei, Nanjing University of Science And Technology

This topic intends to reflect the latest developments in optical testing, measurement technology, and equipment. The focus includes but is not limited to: optical testing and measurement based standards, metrology and online digital calibration, measurement issues in the advanced optical manufacturing process, optical component geometric parameters and physics Characteristic measurement methods, development of key optical devices in optical measurement systems, test and measurement technologies based on optical devices (gratings, optical fibers, etc.), advanced measurement methods in micro-nano manufacturing, macro and micro measurement techniques, precision and ultra-precision machining measurement, precision and Modern optical technology and instruments for ultra-precision measurement, data processing methods in optical measurement, new optical test and measurement principles, new optical measurement instruments and equipment, new instrument theory and design methods, micro-nano test and measurement methods, extremely small sizes Optical measurement methods, vision measurement technology, etc.

LU Zhengang, Harbin Institute of Technology

YANG Shuming, Xi’an Jiaotong University

LI Wenhao, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

GU Tianqi, Fuzhou University

REN Mingjun, Shanghai Jiao Tong University

ZHANG Xiaodong, Tianjin University

TAN Yidong, Tsinghua University

CHEN Xiuguo, Huazhong University of Science and Technology

YU Yiting, Northwestern Polytechnical University

HU Pengcheng, Harbin Institute of Technology

SHAN Mingguang, Harbin Engineering University

WANG Yun, Beijing Institute of Technology

HU Yao, Beijing Institute of Technology

ZHANG Xiwen, Aerospace Information Research Institute, CAS

SHEN Hua, Nanjing University of Science and Technology 

WU Guanhao, Tsinghua University

This topic is intended to reflect the latest development of new systems, concepts, designs, technology and methods, with emphasis on but not limited to: novel optical design, optical fabrication, optical detection, optical alignment; highlight new technology, new materials, new design, new methods, new ideas and new concepts; realize the manufacture of metal optics, infrared freeform surface and die steel; obtain the new characterization of magneto rheological, ion beam, liquid jet, NC grinding and freeform surface; present the new concept of inspection method, machining method and assembly method.

XUE Changxi, Changchun University of Science and Technology

ZHANG Yunlong, Xi’an Institute of Applied Optics

XU Liang, Xi'an Institute of Optics and Precision Mechanics, CAS

WU Rengmao, Zhejiang University

ZHANG Cheng, Huazhong University of Science and Technology

WANG Xuewen, Wuhan University of Technology

BAI Yang, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

ZHAO Hongchao, Sun Yat-sen University

YAN Lisong, Huazhong University of Science and Technology

XIE Bin, Soochow University

CHEN Lei, China Aerodynamics Research and Development Center

WANG Jing, Xi’an Institute of Applied Optics

ZHANG Feng, Xi’an Institute of Applied Optics
Topic Secretary：

YANG Chao, Changchun University of Science and Technology

This topic intends to reflect the latest developments in super-resolution manufacturing and equipment, including but not limited to: new mechanisms and new methods of super-resolution manufacturing, surface plasma lithography and equipment, super-resolution additive manufacturing technology and equipment , Sub-wavelength structure manufacturing technology, super-resolution laser direct writing lithography and equipment, nanoimprint technology and equipment, atom lithography and applications, scanning probe direct writing and equipment, laser scanning holographic lithography, advanced process technology, new materials and applications, near-field optical detection technology, nano and sub-nanometer precision leveling and alignment technology

GAO Ping, Institute of Optics and Electronics, CAS

XU Ting, Nanjing University

WANG Liang, University of Science and Technology of China 
L. Jay Guo, University of Michigan，USA

YUE Weisheng, Institute of Optics and Electronics, CAS

GAN Zongsong, Huazhong University of Science and Technology

ZHOU Rui, Xiamen University

DENG Xiao, Tongji University

XU Zongwei, Tianjin University

ZHAO Jun, Shanghai Advanced Research Institute, CAS
LI Liansheng, Beijing Institute of Control Engineering

This topic intends to reflect the latest developments in extreme manufacturing technology and equipment, focusing on including but not limited to: extreme-scale (maximum/minimum/cross-scale) optical free-form surfaces and microstructure control, shape-controlling ultra-precision processing technology, and difficult energy field assistance Extreme manufacturing technology of processed materials, extreme manufacturing technology of atomic-level ultra-smooth surface, extreme service performance testing and evaluation technology of high-performance components, high/ultra-high strain rate cutting and grinding processing technology and equipment, etc.

GUO Jiang, Dalian University of Technology

ZHOU Tianfeng, Beijing Institute of Technology

CUI Hailong, Institute of Machinery Manufacturing Technology

GONG Feng, Shenzhen University
Xichun Luo, Centre of Precision Manufacturing, University of Strathclyde，UK

LI Yaguo, Chengdu Fine Optical Engineering Research Center

YANG Gao, Shenzhen University

ZHANG Zhiyu, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

ZHANG Jianguo, Huazhong University of Science and Technology

WANG Chao, Institute of Machinery Manufacturing Technology

GU Yan, Changchun University of Technology

LIAO Degeng, Laser Fusion Research Center

DENG Hui, Southern University of Science and Technology

YAO Peng, Shandong University
LI Haonan, University of Nottingham Ningbo China

This topic intends to reflect the latest developments in novel manufacturing technology, process and approaches, including but not limited to: new nano polishing technology, design and manufacture of metasurfaces/ superstructures materials, advanced beam energy polishing, special material processing technology, advanced surface treatment technology, design and manufacture of new devices, design and development of new processing equipment and tools, new ultra-hard cutting tools, design and optimization of manufacturing process chain, system design and simulation.

XU Xueke, Shanghai hengyi optics precision machinery co., LTD

DAI Bo, University of Shanghai for Science and Technology

CHEN Junyun, Yanshan University

LU Yanjun, Shenzhen University 

SHI Feng, National University of Defense Technology

WANG Shaokai, Harbin Institute of Technology

XIONG Tao, Hubei Jiuzhiyang Infrared System Co., Ltd 

LIU Chao, Beihang University

SU Xing, Institute of Machinery Manufacturing Technology
JIANG Chao, Central South University
Topic Secretary：

FANG Yuanyuan, Shanghai Institute of Optics and Fine Mechanicas, CAS

This topic intends to reflect the latest developments in optical film design, preparation and characterization technology and the application results of major projects. The focus includes but not limited to: new optical film materials covering the optical spectrum from X-ray to far-infrared, and performance control of optical film materials New developments; high-performance optical film design and manufacturing technology represented by X-ray, laser and infrared typical optical spectrum, multi-functional surface film design and manufacturing technology, multifunctional optical film design and manufacturing technology (light, heat, force) , Electricity); film performance testing technology for application requirements, such as ultra-wide spectrum optical constant characterization technology, low loss optical film performance testing technology, special environmental optical film performance evaluation and testing methods, etc.; optical film manufacturing equipment and testing instruments Latest progress, etc.

LIU Huasong, Tianjin Jinhang Institute of Technical Physics

CHENG Xinbin, Tongji University

SHEN Weidong, Zhejiang University

ZHANG Jinlong, Tongji University

WANG Li, Beijing Institute of Space Mechanics & Electricity

TANG Qianlong, Jiangsu North Huguang Opto-electronics Co.,LTD

WANG Xiaoyi, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

LI Gang, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, CAS

DUAN Weibo, Shanghai Institute of Technical Physics of the CAS
WANG Yanzhi，Shanghai Institute of Optics and Fine Mechanicas, CAS
WEI Yaowei，Laser fusion research center

This topic intends to reflect the latest development of flexible materials and devices, focusing on including but not limited to: flexible material performance research and device preparation, including mechanical and optical performance analysis of flexible materials, optical structure design of flexible devices, and micro-nano processing technology used in preparation And the preparation of multi-material multi-component devices, system integration, etc.; functional applications of flexible materials and devices, such as flexible displays (intraocular lenses), photonic circuits, biological systems, sensors (strain, temperature, biochemical molecules, etc.), energy harvesters , Application and performance analysis of flexible optical devices such as wide-band tunable stealth devices and nano imaging super lenses in sensing, optical interconnection, light field control and other fields.

JI Shijun, Jilin University

HU Shanshan, Guangxi University

FAN Cheng, Soochow University 

WANG Maolu, Harbin Institute of Technology

ZHANG Xinge, Jilin University

WANG Hua, Taiyuan University of Technology

WANG Dongfang, Shanghai Institute of Technical Physics of the CAS

YUAN Zhishan, Guangdong University of Technology

WANG Kejun, Soochow University

This topic intends to reflect the latest developments in optical system integration in optical manufacturing and equipment, including but not limited to: spatial complex focal plane splicing and registration technology, high precision centering, alignment and test for composite optical system, system integration and test technology of stereo mapping camera, inner orientation element and distortion measurement, optical alignment and performance evaluation of cryogenic optical system, optical alignment and performance evaluation of infrared optical system, optical alignment and performance evaluation of laser tracking system, optical alignment and test of Fourier and grating spectrometers, computer-aided alignment technology, gluing and assembly with torsionless stress, in-situ detection technology, high precision positioning and multi-degree of freedom alignment technology, optical surface evaluation technique based on frequency component, wavefront detection technology, high-power laser system assembly technology.

ZHANG Jiyou, Beijing Institute of Space Mechanics & Electricity

WU Xuefeng, Harbin University of Science and Technology

SHEN Zhengxiang, Tongji University

ZHANG Ming, Institute of Optics and Electronics, CAS

DONG Zhichao, Technical Institute of Physics and Chemistry, CAS

ZHAO Chengqiang, Shanghai Institute of Optics and Fine Mechanics, CAS

YUN Yu, China Jiuyuan hi-tech Equipment Co., Ltd

WANG Haitao, Huazhong Institute of Photoelectric Technology

BI Yong, CAS Nanjing Astronomical Instruments Co., LTD

XU Song, Shanghai Aerospace Control Technology Institute

This topic intends to reflect the latest developments in the field of optoelectronic materials and devices for image sensors and detectors, including but not limited to: growth, characterization and modeling of optoelectronic materials and devices, X-ray, ultraviolet, visible light, near infrared Design and manufacture of photodetectors for short-wave infrared, mid-wave infrared, long-wave infrared, and very long-wave infrared, the readout circuit and low-temperature electronics of photodetectors, digital focal plane, intelligent focal plane, photoelectric integrated micro system, Environmental adaptability and reliability of photodetectors.

CHEN Ruiming, Beijing Institute of Space Mechanics & Electricity

WANG Shaowei, Shanghai Institute of Technical Physics of the CAS

HU Weida, Shanghai Institute of Technical Physics of the CAS

WANG Jianlu, Shanghai Institute of Technical Physics of the CAS 

ZHOU Peng, Fudan University

XU Jiangtao, Tianjin University

WANG Lai, Tsinghua University

LU Wengao, Peking University

LIU Liyuan, Institute of Semiconductors, CAS
Topic Secretary：

HAN Liqiang, Beijing Institute of Space Mechanics & Electricity

This topic intends to reflect the latest developments in optofluidic chip manufacturing technology and its applications, combining optical manufacturing and microfluidics technology, including but not limited to: discussing the research progress of using microfluidic technology to manufacture various optical components, and using Research progress on the preparation of microfluidic chips with different optical manufacturing technologies. Analyze the characteristics and advantages of optical flow control components and systems, and demonstrate the application of optical flow control technology in optical inspection, biomedicine, chemical analysis, and real-time inspection. It aims to use these new technologies to provide better solutions for the next generation of precision optical systems such as biochemical analysis, medical testing, and environmental monitoring.

ZHANG Dawei, University of Shanghai for Science and Technology

YANG Yi, Wuhan University

JIANG Xuesong, Shanghai Jiao Tong University 

SHUI Lingling, South China Normal University

WANG Guanghui, Nanjing University

GONG Yuan, University of Electronic Science and Technology of China

WU Jiandong, Shenzhen Institute of Advanced Technology, CAS

This topic intends to reflect the latest developments in intelligent manufacturing and equipment, including but not limited to: New concept and model of intelligent manufacturing, digital twin and virtual reality, smart equipment design, sensor and technique for intelligent manufacturing, monitoring technology for the manufacturing processing, structural and non-structural big data base, processing and feature fusion of big manufacturing data, deep learning and artificial intelligent, Intelligent evaluation and control, Smart manufacturing application of IOT (internet of thing) and 5G etc.

PENG Yunfeng, Xiamen University

WANG Wei, University of Electronic Science and Technology of China

WANG Sujuan, Guangdong University of Technology 

CHEN Guoda, Zhejiang University of Technology

HUANG Peng, Nanjing University Of Science And Technology

ZHANG Guoqing, Shenzhen University

SUN Zhanwen, Guangdong University of Technology

ZHANG Shaojian, Nanchang University

This topic focuses on the latest developments and applications of advanced optical technology in biomedicine. This topic will discuss the feasibility and advantages of new optical materials, optical devices, spectroscopy and imaging systems corresponding to various application scenarios in biomedicine. It aims to promote the two-way relationship between application and manufacturing, so that advanced optical manufacturing can be further applied and promoted in biomedical research, medical testing and other aspects. At the same time, the demand side puts forward further improvement requirements for advanced optical manufacturing.

MA Jiong, Fudan University

LI Bei, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

WU Xiang, Fudan University

LI Hui, Suzhou Institute of Biomedical Engineering and Technology, CAS

SI Ke, Zhejiang University

MU Quanquan, Changchun Institute of Optics, Fine Mechanics and Physics, CAS

 

lvzichen@csoe.org.cn，13810226340

wei_w@fudan.edu.cn

SPIE Editor：Nicole Harris，nicoleh@spie.org

Conference Proceedings Coordinator, SPIE

 

 

The white paper on the value of proceedings is at The unique value of Proceedings of SPIE     Value of Proceedings.pdf

 

Presenting and publishing your research in Proceedings of SPIE has multiple professional and business benefits. Read The Value of Proceedings white paper for a comprehensive discussion.

 

Proceedings of SPIE are uniquely valuable as they are used by researchers worldwide, and lead in patent cites among optics and photonics collections. They frequently rank among the 50 most used serials, out of 50,000 analyzed by Ex Libris. If it is ready for journal publication, your proceedings paper can be submitted with minimal or no revision for consideration in the relevant SPIE journal.

  

SPIE partners with relevant scientific databases to enable researchers to find Proceedings of SPIE. They are indexed in Web of Science, Scopus, Ei Compendex, Inspec, Google Scholar, Astrophysical Data System (ADS), CrossRef, and other scholarly indexes, and are widely accessible to leading research organizations, conference attendees, and individual researchers. 

 

PhotoniX、Optical Engineering (SCI)、Journal of Micro/Nanolithography、MEMS、and MOEMS (SCI)、Photonic Sensors (SCI)、Opto-Electronic Advances(OEA)（SCI）、《信息与电子工程前沿（英文）》（FITEE）（SCI）、《红外与激光工程》(Ei)、《中国光学》（ESCI、Ei）、《光子学报》（Ei）、《光学精密工程》（Ei）etc.

 

SPIE publishes ten significant journals in major areas of optics, photonics, and imaging.

These journals welcome submission of journal-ready manuscripts that are derived from conference papers, as appropriate for each journal.

See the SPIE policy on submission of manuscripts derived from conference papers.

Submissions to SPIE journals based on reports that have been submitted to or published in a conference proceedings should adhere to the following guidelines:

 

Conference proceedings provide a vehicle for rapid reporting of ideas, techniques, and results. It is not uncommon for these reports to be somewhat incomplete and inconclusive. The purposes of proceedings papers range from snapshots of recent or continuing work to the reporting of a completed work or project. Journal papers are expected to be original, complete, and polished; to contain comparisons of theoretical and experimental results; and to include substantial conclusions and comprehensive references to other work.

 

SPIE publication policy permits manuscripts based partly or entirely on scientific content previously reported in SPIE proceedings to be submitted to SPIE journals. Furthermore, SPIE permits manuscripts based partly or entirely on scientific content previously reported in a non-SPIE conference to be submitted to SPIE journals so long as the copyright policies of the non-SPIE conference are properly adhered to (see below). In most cases, it is anticipated that the journal submission will represent a substantively expanded, refined, or otherwise revised manuscript relative to the proceedings paper to fully satisfy the standards of significance, originality, and presentation quality expected in a journal submission that is being considered for acceptance through the journal peer-review process. A manuscript submitted to an SPIE journal that incorporates minimal or no revisions over a prior or concurrent SPIE proceedings paper may be considered for publication in an SPIE journal and admitted into the peer-review process provided the submission fulfills the requirements of significance, originality, and completeness expected in a journal submission. SPIE does not consider publication of an accepted journal article based on a prior proceedings paper to constitute double publication.

 

If a manuscript (or portion of a manuscript) was previously published in a conference proceedings or is under consideration for publication in a conference proceedings, this information must be disclosed when the manuscript is initially submitted to an SPIE journal. Authors should also reference or acknowledge the prior proceedings paper within the submitted journal article.

 

SPIE copyright policy permits authors to submit derivations of their proceedings papers to their journal of choice. Submissions to SPIE journals are permissible provided the other expectations described herein are satisfied. Authors submitting to journals published by other publishers should verify that publisher's copyright and submission policies. Authors wishing to submit papers that were presented at or published in a conference proceedings sponsored by organizations other than SPIE are responsible for adhering to the copyright policies related to that presentation or publication and are expected to disclose the prior presentation or publication history of the submission.

All proceedings manuscripts submitted to an SPIE journal must be prepared according to the guidelines provided here.

 

https://spie.org/publications/spie-journals

（1）报名方式

无论有无投稿，均欢迎注册参会！

参会者请务必到以下网址进行会议注册： 

网址：https://b2b.csoe.org.cn/registration/YSAOM2021.html

注册系统2021年10月27日中午关闭，后续如需注册请到现场进行

会议费：2650元/人，2021年10月15日前缴费优惠为2450元/人。

学生优惠为1450元（不含在职学生）。

会议费包括资料袋、报告文集、会议指南文件、会议杂支、税等，不含论文版面费和住宿费。论文版面费2500元，相同第一作者不超过两篇。

（2）付款方式：

1.在线支付：注册完成后，可跳转到在线支付页面，选择“支付宝”在线完成支付。

2.汇款转账：

开户银行：工行北京科技园支行

户名：中国光学工程学会

账号：0200296409200177730 

汇款时作者请务必注明“姓名+稿件编号”，非作者请注明“YS+姓名”,以便核对。

会议将提供正规会议费发票。
参会文件下载：

Website:

The registration system will be closed at noon on October 27, 2021. If you need to register after 27th October 2021, please go to the site.

Conference fees include information kits, report essays, conference guide documents, conference miscellaneous expenses, taxes, etc., excluding paper layout fees and accommodation fees.

2. online payment: After registration, you can jump to the online payment page and select "Alipay" to complete the payment online.

3. Remittance transfer:

Bank of account: ICBC Beijing Science and Technology Park Branch

Account Name: Chinese Society for Optical Engineering

Account number: 0200296409200177730

The meeting will provide a formal meeting fee invoice.

Prof. Craig B. Arnold, Princeton University, USA——Ultra-high speed focal control for laser processing applications
Prof. Peter R. Herman，University of Toronto, Canada——Shaping Nonlinear Ultrafast Laser Interactions – Gateway to Novel Photonic-capillary Devices in Optical Fiber

Prof. Kenichi L. Ishikawa，University of Tokyo，Japan——Building Science and Theory for Smart Laser Manufacturing
Prof. Benny C.F. Cheung, The Hong Kong Polytechnic University, Hong Kong, China——Nano-surface Generation in Ultra-precision Machining and Applications

YU Guoyu（University of Huddersfield， UK）——Ultra-precision manufacturing in digital age, new challenges Keynote

LI Longxiang（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Magnetorheological Finishing in manufacturing large aspheric surface Keynote

ZHAO Wenchuan（Institute of Optics and Electronics, CAS）——Large Mirror Fabrication and Testing in IOE Keynote

WANG Liang（Nanjing Institute of Astronomical Optics & Technology ,CAS）——The High-resolution, Ultra-stable Spectrograph for Spanish GTC Telescope

WANG Wei（National Astronomical Observatories, CAS）——The HABITATS mission: towards detection of biosignatures on exoplanets

LI Bo（Nanjing Institute of Astronomical Optics & Technology ,CAS）——Robotic polishing for the mirror with large or non-circular aperture

LI Mengjuan（Beijing institute of space Mechanics & Electricity）——High-precision measurement and control of geometric parameters of large-aperture off-axis aspheric surface

HU Haixiang（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Research on the evolution characteristics and error separation methods of the air flow turbulence in large-aperture vertical optical testing

YUAN Qun（Nanjing University Of Science And Technology）——Freeform mirror design through multiple surfaces expansion and mixing
XUE Shuai（National University of Defense Technology）——Adaptive interferometry for complex surfaces

ZHAO Hui（Xi'an Institute of Optics and Precision Mechanics, CAS）——Co-phasing and deformable mirror technique used for orbit assembly of large-aperture optical telescope

WANG Xiqun（Yunnan Observatories, CAS）——LCVR measurement method based on Mueller matrix spectropolarimeter

XUAN Bin（Nantong University）——Study on laser damage resistance properties of quartz glass
Ling Li（Beijing institute of space Mechanics & Electricity）——A Phasing testbed for The Segmented-Mirrors Space Telescope

 

ZONG Wenjun（Harbin Institute of Technology）——Fabrication of visible-infrared hybrid optics with single point diamond turning Keynote

YIN Ziqiang（Guangdong University of Technology）——Research on the ultraprecision machine tool, processing technology and measuring method for microstructure surface

YI Dingrong（Huaqiao University）——Laser Microdissection of Biomaterials under the Guidance of Optical Imaging
ZHU Wule（Zhejiang University）——Non-Newtonian fluid based sub-aperture polishing

GUAN Chaoliang（National University of Defense Technology）——Ultra-precision machining technology of complex curved metal mirror

ZHANG Yun（Institute of Optics and Electronics, CAS）——Precision optical manufacturing technology and applications

YOU Fangyi（Huaqiao University）——Monitoring and evalutating the wear of alumina  grinding wheel

PAN Ri（Beijing University Of Technology）——Research on dynamic and static performance optimization for a robot-assisted bonnet polishing system

ZHONG Bo（Laser Fusion Research Center）——evaluation and compensation of a kinematic error to enhance prepolishing accuracy for large aspheric surfaces by robotic bonnet technology

WANG Jianjian（Tsinghua University）——ductile-regime surface texturing of silicon with ultrasonic-assisted cutting for the application of advanced optics

FAN Wei（Institute of Machinery Manufacturing Technology）——The study on curved-surface tool influence function deduction scheme for magnetorheological finishing

WANG Chunjin（The Hong Kong Polytechnic University）——Magnetic field assisted batch polishing technology for freeform surfaces

HAN Yanjun（Southwest Jiaotong University）——Physical analysis and application of polishing convolution removal process
WEN Qiuling（Institute of Manufacturing Engineering, Huaqiao University）——Fundamental research on energy beam processing of single crystal sapphire substrate
QI Erhui（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Advanced Fabrication Technology for Large Aperture Flat Mirrors

 

ZHANG Wenxi（Aerospace Information Research Institute, CAS）——Research and application of optical heterodyne interferometry Keynote

HU Pengcheng（Harbin Institute of Technology）——Development of Ultra-precision Displacement Measuring  Laser interferometry at Harbin Institute of Technology Keynote

Young-Jin KIM（Korea Advanced Institute of Science and Technology）——Multi-scale Dimensional Metrology with a Frequency Comb: from Sub-nanometers to Kilometers Keynote

SHEN Hua（Nanjing University of  Science and Technology）——Tilt-carrier interferometry based on deep learning surface reconstruction algorithm

ZHANG Fumin（Tianjin University）——Distance measurement technology with micro-comb

ZHAO Xing（Nankai University）——Extending the dynamic range of detector in non-contact diffuse optical tomography system using deep learning

LIU Huan（Xi’an Technological University）——Visible-NIR-SWIR Broadband Photodetectors based on Colloidal Quantum Dots

LIU Dong（Zhejiang University）——Automatic detection technology for defects and damage of large aperture optics
WANG Xiaokun（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Measurement of Large Mirror by Subaperture Stitching Interferometry

LIU Lei（Harbin Engineering University）——Improved-quality and high-speed phase retrieval of dual-wavelength off-axis digital holography

HU Yao（Beijing Institute of Technology）——Phase retrieval from a single frame of interferogram

LIU Zhaowu（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Key technology of displacement monitoring for large area grating manufacturing

Tong, Zhen（University of  Huddersfield, UK）——Ultra-precision fast-tool-servo machining of freeform surfaces with assist of on-machine surface measurement

 

WU Rengmao（Zhejiang University）——Freeform optical design of beam shaping systems Keynote

ZHANG Cheng（Huazhong University of Science and Technology）——metasurface-based Optical Field Manipulation Keynote

WANG Daodang（China Jiliang University）——Deep learning based deflectometry for simultaneous multisurface measurement of freeform refractive optics

GUO Xuhan（Shanghai Jiaotong University）——Dielectric metamaterial assisted silicon photonic devices for optical signal manipulation

DONG Yifan（China University of Geosciences）——Infrared Photodetection with Colloidal HgTe Quantum Dot based Devices

WANG Xuewen（Wuhan University of Technology）——Ultrafast Laser micro/nano fabrications

YAN Yong（SUN YAT-SEN UNIVERSITY）——Technical requirements and development of gravitational wave telescope

LIU Hua（Northeast Normal University）——The Technology of Lithography and Stereolithography based on DMD
BAI Yang（Changchun Institute of optics, fine mechanics and physics, CAS）——Research on ultra-precision polishing technology of aluminum alloy mirror

MAO Xianglong（Xi'an Institute of Optics and Precision Mechanics, CAS）——Freeform optics and its application in imaging optical systems

YANG Tianling（SANHE LENSTECH OPTOELECTRonIC SCIENCE & TECHNOLOGY CO.,LTD.）——Application of computational imaging in infrared optical system

LI Zhengyang（Nanjing Institute of Astronomical Optics & Technology， CAS）——Design of Antarctic Optical Telescopes

LIU Guogan（Shanghai Modern Advanced Ultra Precision Manufacturing Centre）——Research on Polishing Technology of High Precision 3D Printing Aluminum Mirror

XU De（FUJIAN FRAN OPTICS CO.，LTD.）——Application of Ultra-precision Machining and Manufacturing for Large Optical Parts
WANG Yongjie（Xi'an Institute of Optics and Precision Mechanics, CAS）——Material research of advanced Al alloy mirror

 

Bo Cui（University of Waterloo，Canda）——Plasmonic structure fabrication with single-digit-nanometer resolution using electron beam lithography Keynote

L. Jay Guo（University of Michigan，USA）——From Nanoimprint back to Photolithography for Scalable Nanopatterning Keynote

Jeroen Anton van KAN（National University of Singapore）——Development of a next generation proton microscope for proton beam writing and 3D imaging at the nanoscale
WU Dong（University Of Science And Technology Of China）——SLM-based femtosecond laser 3D microfabrication and its functional applications

CHENG Guanghua（Northwestern Polytechnical University）——Nano-drilling with ultrafast Bessel laser beam

LI Xiaowei（Beijing Institute of Technology）——Surface micro-nano structures processing with temporal/spatial shaping femtosecond laser

WU Yanqing（Shanghai Advanced Research Institute, CAS）——The recent development of soft x-ray interference lithography in SSRF

WANG Cong（Central South University）——Fabrication of functional micro/nanostructures by ultrafast laser and their applications
REN Mengxin（Nankai University）——Lithium niobate metasurfaces—A new choice for nonlinear optics

JI Ran（QingDao GERMANLITHO CO.,LTD.）——Industrial application of nano-imprint in the production of micro - nano optical devices
MI Sichen（École Polytechnique Fédérale de Lausanne, EPFL）——Angled reactive ion etching assisted by Faraday Cages for the fabrication of freestanding structures

 

LUO Xichun（University of Strathclyde，UK）——Fabrication of nanogratings by ultraprecision diamond turning Keynote

XU Jianfeng（Huazhong University of Science and Technology）——Field assisted ultra precision manufacturing Keynote

ZHOU Tianfeng（Beijing Institute of Technology）——Precision Glass Molding Technology for Optical Microstructures

CUI Hailong（Institute of Machinery Manufacturing Technology）——Ultra-precision aerostatic bearings and its application

ZHANG Zhiyu（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Extreme-precision fabrication of large-area micro/nanostructures for interference measurement
YAN Jianfeng（Tsinghua University）——Research progress of ultrafast laser micro/nano processing of biomaterials and its application

ZHANG Ge（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Study on fabricate of large-scale silicon carbide mirror blank

LI Liansheng（Beijing Institute of Control Engineering）——Current status and prospects of precision manufacturing technology for space X-ray focusing telescope

ZHANG Xi（Shenzhen University）——ECR Extreme Manufacturing of Flexible Nanofilm and its Electro-optical Application

YE Minheng（Institute of Machinery Manufacturing Technology）——Research on the Magnetorheological Finishing Fluid with High Efficiency and Stability
YU Nan（University of Edinburgh）——Digitally supported plasma processing for ultraprecision optical surfaces

XU Shaolin（Southern University of Science and Technology）——Fabrication of large-area nano-gratings based on self-aligned laser induced periodic surface structures

 

XU Xueke（Shanghai hengyi optics precision machinery co., LTD）——Flexible Polishing Technology and Machine Tool Basing on Force Control Keynote

XIE Jin（South China University of Technology）——Intelligent control of process variables in non-isothermal hot-embossing of two-level microlens array products Keynote

LI Zhong（Huazhong Institute of Photoelectric Technology）——Processing and preparation technology of metal mesh electromagnetic shielding sapphire window Keynote
YANG Zhuoqing（Shanghai Jiao Tong University）——“Lab-on-Fiber”: A Novel Technology for Fabricating Sensors on the Optical-Fiber Surface

LIU Dong（Zhejiang University）——Detection of Super Weak defects & Damage for Large Optics
LI Lei（Sichuan University）——Zoom liquid lens and its application in imaging system

CHEN Junyun（Yanshan University）——Femtosecond laser machining of nanotwinned diamond
ZHAO Rui（Nanjing University of Posts and Telecommunications）——Electrowetting-based Optical Phase modulator

LIU Chao（Beihang University）——Optofluidic devices and its application in display and image
XU Zhengji（Sun Yat-sen University）——metasurface-based subtractive color filter fabricated on a 12-inch glass wafer using a CMOS platform

ZHANG Long（Shanghai Jiao Tong University）——Near-polished grinding of fused glass with the assistant of CeO2 liquid

LU Yanjun（Shenzhen University）——Precision grinding of micro-structured LED light guide plate mold core and its application in micro injection molding

SU Xing（Institute of Machinery Manufacturing Technology）——Nonlinearity suppression in freeform surface generation by atmospheric pressure plasma processing

LI Ping（Guangzhou University）——Micromachining of microlens structured surface for solar cell substrates

LI Duo（Harbin Institute of Technology）——Analysis of misalignment effect and characterization method for imprinting continuous phase plates

HU Manfeng（Foshan university）——Study on the mechanism and micro optical properties of composite micro-nano lens array  by rapid hot embossing
WANG Yanchao（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Large aperture optical film deposition method based on movable magnetron sputtering deposition source

 

HU Chaoquan（Jilin University）——Smart optical thin films based on chalcogenide phase change materials Keynote

YANG Lei（Harbin Institute of Technology）——Study on infrared antireflection protective film technology against extreme environment Keynote

CHEN Jian（ZC Optoelectronic Technologies, Ltd.）——Sub-micron photothermal scanning microscopy for optical coating applications Keynote

LIU Huasong（Tianjin Jinhang Technical Physics Institute）——Research progress and development trend of ultra-low loss laser thin film technology

DUAN Weibo（Shanghai Institute of Technical Physics,CAS）——Broadband high-reflectance mirror coatings for space remote sensing

Vladimir Pervak（Ludwig Maximilian University of Munich）——Dispersive mirror: past and future

SHEN Weidong（Zhejiang University）——Phase properties of optical coatings and its applications

LI Gang（Dalian Institute of Chemical Physics,CAS）——Large aperture micro-structure laser windows

YUE Wei（North China Research Institute of Electro-Optics）——Development of variable-angle band pass filter for space camera

LIU Zhen（Changchun Institute of Optics,Fine Mechanics and Physics, CAS）——Silicon Cladding and HR film coating for the world's largest RB-SiC mirror 

WEI Yaowei（Laser fusion research center）——Application of atomic layer deposition on high power laser thin films
HE Wenyan（Institute of Optics and Electronics, CAS）——Study on Preparation and Characterization of Thin Films for High-performance Beam Splitters

HE Tao（Tongji University）——The metasurface based on optical thin film achieves perfect efficiency anomalous reflection

 

YANG Lijun（Harbin Institute of Technology）——Flexible double-side energy storage device by femtosecond laser fabrication
CHEN Jianxiong（Fuzhou University）——A new method for femtosecond laser super resolution manufacturing of large format coded micro polarizer array
JIN Guoqing（Soochow university）——Flexible 3D Printing Technology for Soft Robots

 

 

XU Jiangtao（Tianjin University）——Dynamic vision bionic image sensor and application field Keynote

YE Zhenhua（Shanghai Institute of Technical Physics, Chinese Academy of Sciences）——Development of space infrared photodetectors at SITP Keynote

LIU Yufei（Chongqing University）——Silicon fluorescent nanomaterials for pH detection and biomedical imaging applications Keynote

LIU Liyuan（Institute of Semiconductors,Chinese Academy of Sciences）——Smart vision chip Keynote

DU Peng（Hunan University）——Structural engineering and optical properties of antimony based type II superlattices Keynote

CHEN Baile（ShanghaiTech University）——High speed type-II superlattice photodetectors

YI Fei（Huazhong University of Science and Technology）——metamaterial enabled multifunctional infrared imaging detection systems

ZHENG Jiyuan（Tsinghua University）——A smart quenching method for single photon avalanche diode

ZHANG Yacong（Peking University）——Digital Readout Circuit for Infrared Focal Plane Array

WU Songbo（Beijing Institute of Space Mechanics & Electricity）——Beijing Institute of Space Mechanics & Electricity

WANG Guowei（Institute of Semiconductors,Chinese Academy of Sciences）——Progress of long wavelength infrared focal plane arrays based on antimonide compounds superlattice

WANG Fei（Orbbec）——A 5um 640x480 Stacked high performance Indirect Time-of-Flight CMOS Image Sensor

SUN Qiyang（Beijing Institute of Space Mechanics & Electricity）——The development of T2SL infrared detector for space remote sensing
WANG Xudong（Shanghai Institute of Technical Physics, CAS）——New type of photodetector modulated by ferroelectric field

 

ZHAO Yong（Northeastern University）——Research on optic-fiber manipulation and concentration measurement towards biochemical particulates Keynote
ZHANG Xuming（The Hong Kong Polytechnic University）——Microfluidics Platform for Artificial Photosynthesis Systems Keynote
JIANG Xuesong（Shanghai Jiao Tong University）——Micropatterns Fabricated by Photodimerization-Induced Diffusion Keynote

ZHANG Dawei（University of Shanghai for Science and Technology）——Optofluidic biomedical diagnosis technologies

YANG Yi（Wuhan University）——Optofluidic integrated system and its application in biochemical medical engineering

GONG Yuan（University of Electronic Science and Technology of China）——Optofluidic laser biosensors

XIAO Limin（Fudan University）——Subwavelength Optofluidic Microstructured Optical Fibers and Properties

SHUI Lingling（South China Normal University）——Droplet microfluidics for construction of functional materials

LIAO Changrui（Shenzhen University）——Optical fiber microstructured sensors fabricated by femtosecond laser

WANG Guanghui（Nanjing University）——Micro- and nanofluidic chip and its optical detection and manipulation technologies

ZHANG Lei（Zhejiang University）——Ultrasensitive optofluidic sensors based on optical micro/nanofiber

WU Jiandong（Shenzhen Institute of Advanced Technology, CAS）——Development of microfluidic chips and portable imaging systems for cell migration studies
REN Yuxuan（Fudan University）——Pulling biological cells with NIR laser mediated photonic nanojet
WANG Jiawei（Harbin Institute of Technology Shenzhen）——“Lab-in-a-tube” inspired by on-chip nanomembrane origami technology

 

LIU Qiang（Guangdong University of Technology）——Digital twin-based designing and optimizing of smart workshop Keynote

LIANG Guiqiang（Beijing Linghang Science and Technology Education Technology Co. Ltd）——Discussion on some problems of cutting simulation technology and its industrialization process

WANG Tao（AVIC XINXIANG  AVIATION INDUSTRY (GROUP) CO. , LTD.）——Research on Multi-variety Small Batch Lean Development and Manufacturing Model

CHENG Ying（Beihang University）——Digital Twin enhanced smart manufacturing services

LAI Yunhe（Hong Kong Applied Science and Technology Research Institute）——Design and fabrication of the metalens for 3D sensing

LIU Pengfei（Hefei Hagong Tunan Intelligent Robot Co., Ltd.）——Research and Application of Autonomous Control Technology for Intelligent Robot

YI Dingrong（Huaqiao University）——Intelligent on-line products quality inspection and automatic sorting methods and systems

ZHUANG Feifei（Shenzhen Yuejiang Technology Co., Ltd）——Application exploration of lightweight collaborative robotic arm

 

Peng Qian（The Oslo University Hospital）—— Light sources, photodetection and photodynamic therapy

WANG Ke（Shenzhen University）——Deep-brain multiphoton microscopy

SI Ke（Zhejiang University）——Scattered light processing in optical microscopy

GONG Wei（Zhejiang University）——High-throughput optical imaging based on ultrafast optical clearing method

ZHANG Pengfei（Dalian University of Technology）——Speckle Reduction in Optical Coherence Tomography with Optimized Random Phase Modulation
SUN Yunlu（Fudan University）——Multidimensional laser manufacturing of biomacromolecule-based biological micro/nano optics and electronics

FENG Shilun（Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences）——Maskless laser lithography microstructure for single-cell research

LI Dayu（Changchun Institute of Optics, Fine Mechanics and Physics, CAS）——Fourier ptychographic microscopy technology based on deep learning

LU Qijing（Fujian Normal University）——Liquid metal core optofluidic microcavities 

Holiday Inn Shanghai Hongqiao，No.3555 QiXin Road, Minhang District，Shanghai
会议酒店：上海大华虹桥假日酒店（上海 闵行区 七莘路3555号）
酒店预订方式：喻经理（13916973452）可享受会议价550元/天